FTDI FT232H USB Serial Adapter Products

Created:  
Updated:   12May2024 09:20:00 UTC 2024-05-12T09:20:00Z

Description

The FTDIFuture Technology Devices International FT232H ICIntegrated Circuit is a USB Serial Adapter that converts USB signals to UARTUniversal Asynchronous Receiver-Transmitter/I2CInter-Integrated Circuit. Also referred to as IIC or I2C./SPISerial Peripheral Interface for 1.8V to 5V systems. It operates at USB 2.0 High Speed and supports baud rates from 300bps to 12Mbps over UART, up to 40Mbytes/s over a synchronous 245 parallel FIFOFirst In First Out interface, or up to 8Mbyte/s over an asynchronous 245 FIFO interface.

This adapter should auto install on most operating systems without the need for additional drivers.

The FT232H IC has power pins (VCC, GND), data pins (TX, RX), control pins (RI, DTR, DSR, DCD, RTS, CTR), and ACBUS GPIOGeneral Purpose Input Output pins (ACBUS0-ACBUS9), defined in the table below. However, some modules may not include some or all of the control pins or ACBUS pins.

FT232H Pinout
Pin Description
VCC Output power supply 1.8V to 5V
VCCD Output power supply 3.3V
VCCA Output power supply 1.8V
GND Common ground for power and logic.
TX/RX UARTUniversal Asynchronous Receiver-Transmitter transmit and receive data lines.
SCL/SDA 2-Wire I2CInter-Integrated Circuit. Also referred to as IIC or I2C. data lines.
SCL/MOSI/MISO/CS 4-Wire SPISerial Peripheral Interface data lines.
RI Ring Indicator Control Input. This pin is active low.
DTR Data Terminal Ready output. This pin is active low.
DSR Data Set Ready input. This pin is active low.
DCD Data Carrier Detect input that is usually present inside an RS-232 cable.
RTS Ready To Send control output. This pin is active low.
CTR Clear To Send control input. This pin is active low.
ACBUS0-
ACBUS9
10 Configurable ACBUS I/O pins

Specs

FT232H Specs
Feature Description
Manufacturer FTDIFuture Technology Devices International
Product Page
Protocol Support UARTUniversal Asynchronous Receiver-Transmitter/I2CInter-Integrated Circuit. Also referred to as IIC or I2C./SPISerial Peripheral Interface
I/O Voltage 3.3V or 5V
Max Baud Rate 12Mbaud (UART) - 40MB/s (Sync FIFOFirst In First Out)
Datasheet FT232H Datasheet (PDF)

Products


Adafruit 2264 FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB-C and Stemma QT
Package includes:
  • 1x USB Serial Adapter
  • 2x 16-Pin Straight Male Header (0.1" pin spacing)
Price: $14.95(Updated 10Aug2024 09:07:282024-08-10T09:07:28Z UTC UTC)

Adafruit 2264 FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB-C and Stemma QT
Package includes:
  • 1x USB Serial Adapter
  • 2x 16-Pin Straight Male Header (0.1" pin spacing)
Price: Unavailable (Updated 07Aug2024 20:30:592024-08-07T20:30:59Z UTC UTC)

KOOBOOK FT232H High-Speed Multifunction Module USB to JTAG UART/FIFO SPI/I2C Module
Package includes:
  • 1x USB Serial Adapter
  • 2x standard 0.1" header with 10 pins
Price: $13.99(Updated 07Aug2024 20:36:582024-08-07T20:36:58Z UTC UTC)

HiLetgo FT232H USB to JTAG UART FIFO SPI I2C Serial Module
Seller: HiLetgo
Package includes:
  • 1x USB Serial Adapter
  • 2x standard 0.1" header with 10 pins
  • 1x standard 0.1" header with 4 pins
Price: $13.99(Updated 07Aug2024 20:37:332024-08-07T20:37:33Z UTC UTC)

(0) Comments

Sign in to leave a comment

Sign In