Silicon Labs CP2102N USB Serial Adapter Products
Created:
12Nov2023 06:40:22 UTC
2023-11-12T06:40:22Z
Updated:
12May2024 04:38:15 UTC
2024-05-12T04:38:15Z
Description
The CP2102N ICIntegrated Circuit is a USB Serial Adapter that converts USB signals to 2-wire UARTUniversal Asynchronous Receiver-Transmitter (TXTransmit, RXReceive) for 3.3V systems (the CP2102N input is 5V tolerant). It operates at USB Full Speed and supports baud rates from 300bps to 3Mbps.
For Linux OS the drivers are typically already installed in the kernel, for Windows it will automatically grab the driver from a Windows Update, but for Mac OS the driver needs to be downloaded from the SciLabs website and installed.
The CP2102N IC has power pins (VCC, GND), data pins (TX, RX), control pins (RI, DTR, DSR, DCD, RTS, CTR), and GPIO pins (GPIO0-GPIO6), defined in the table below. However, some modules may not include some or all of the control pins or GPIO pins.Pin | Description |
---|---|
VCC | Power supply 3.3V |
GND | Common ground for power and logic. |
TX | UARTUniversal Asynchronous Receiver-Transmitter data transmit pin. This pin sends the serial output. |
RX | UARTUniversal Asynchronous Receiver-Transmitter data receive pin. This pin receives the serial input. |
RI | Ring Indicator Control Input. This pin is active low. |
DTR | Data Terminal Ready output. This pin is active low. |
DSR | Data Set Ready input. This pin is active low. |
DCD | Data Carrier Detect input that is usually present inside an RS-232 cable. |
RTS | Ready To Send control output. This pin is active low. |
CTR | Clear To Send control input. This pin is active low. |
GPIO0- GPIO6 |
7 General Purpose Input/Output pins that can be controlled from the host |
Specs
Feature | Description |
---|---|
Manufacturer |
Silicon Labs (SciLabs)
Product Page |
Protocol Support | UARTUniversal Asynchronous Receiver-Transmitter |
I/O Voltage | 3.3V (input 5V tolerant) |
Max Baud Rate | 3 Mbps |
Datasheet | CP2102N Datasheet (PDF) |
Products
- 1x USB Serial Adapter
- 1x 16-Pin Straight Male Header (0.1" pin spacing)
- 1x 6-Pin Right Angle Female Header (0.1" pin spacing)
- 1x USB Serial Adapter
- 1x 16-Pin Straight Male Header (0.1in pin spacing)
- 1x 6-Pin Right Angle Female Header (0.1in pin spacing)
- 1x USB Serial Adapter
- 1x User Manual
- 1x USB Serial Adapter
- 1x User Manual
(0) Comments
Sign in to leave a comment
Sign In