BeagleBone Black Products

Description

The BeagleBone Black (BBB) SBCSingle Board Computer is an open-source community-supported embedded computer for makers, developers, educators, and professionals looking to develop custom projects.

The BBB is a credit card sized (3.4in x 2.2in) development platform with a TITexas Instruments AM3358 SoCSystem On a Chip that integrates a Single Core ARM Cortex-A8 at 1GHz, PowerVR SGX530 3D GPU, and 2x PRU 32-bit 200MHz microcontrollers.

The BeagleBone Black Hardware Overview has more details on the board layout, processors, memory, I/O, and power.

BeagleBone Black Specs

BeagleBone Black Rev.C Specs
Parameter	Description
Board Info	BeagleBone Black Product Page BeagleBone Black Documentation
Processors	TITexas Instruments AM3358 SoCSystem On a Chip CPUCentral Processing Unit: Single Core 1GHz ARMAdvanced Reduced Instruction Set Computer (RISC) Machines Cortex-A8 PRUProgrammable Real-time Unit: 2x PRUProgrammable Real-time Unit 32-bit 200MHz microcontrollers GPUGraphics Processing Unit: PowerVR SGX530 3D (200MHz, 1.6GFLOPSGiga (one billion) FLoating point Operations Per Second, 200MP/sMega (one million) Pixels per second fillrate)
Memory	512MB DDRDouble Data Rate (DDR) is a type of SDRAM memory that fetches data on both the leading edge and the falling edge of the clock signal that regulates it.3L 400MHz RAMRandom Access Memory 4GB 8-bit eMMCEmbedded Multimedia Card on-board flash for boot and data storage microSDThe microSD is a Secure Digital (SD) removable miniaturized flash memory card that is the compact version of a standard SD card and is meant to be used with smaller devices. card slot for boot and data storage
USB	1x mini USBUniversal Serial Bus port (client for PC and power) 1x Type-A USBUniversal Serial Bus 2.0 port
Ethernet	1x 10/100 RJ45RJ45 is the most common type of the connector used for Ethernet networking. RJ stands for “Registered Jack” and 45 refers to the interface standard number. It has eight pins, which means that it contains eight separate wires. Ethernet port
Wireless	There is no onboard WiFi or Bluetooth, but you can use the USBUniversal Serial Bus port with a WiFi/BTBluetooth USB Dongle
Video & Sound	1x Micro HDMIHigh-Definition Multimedia Interface 1.4a port, supports EDIDExtended Display Identification Data and resolutions up to 1280x1024 @ 60fpsFrames Per Second or 1920x1080 @ 24fpsFrames Per Second
GPIO	2x 46 pin GPIOGeneral Purpose Input Output headers with up to 2x 5V DC input/output power pins 2x 3.3V DC output power pins 8x GNDCommon Ground pins 65x Digital I/OInput/Output with 8x PWMPulse-Width Modulation and 4x Timers 7x analog inputs (12-bit ADCAnalog-to-Digital Converter (ADC, A/D, or A-to-D) 1.8V Max) 5x UARTUniversal Asynchronous Receiver-Transmitter 2x I2CInter-Integrated Circuit. Also referred to as IIC or I²C. 2x SPISerial Peripheral Interface 2x CANController Area Network (CAN) is a high-integrity serial communication bus designed for harsh environments such as industrial and automotive applications. 2x McASPMultichannel Audio Serial Port 2x MMCMultimedia Card 1x LCDLiquid Crystal Display 1x GPMCGeneral Purpose Memory Controller 1x Power Button 1x Reset Button
Debug I/O	1x 20-pin CTI (Compact TI) JTAGJoint Test Action Group pad for debugging using JTAG emulators. The pad (P2) is on the back of the board for soldering a Samtec FTR-110-03-G-D-06 connector. 1x 6-pin 3.3V TTLTransistor-Transistor Logic UARTUniversal Asynchronous Receiver-Transmitter serial debug header
User I/O	Power, Reset, and Boot Buttons LEDLight Emitting Diode power indicator and 4 user configurable LEDLight Emitting Diodes
Power	A minimum power supply of 5V 1A DC can be used to power the board by itself and a 5V 2A DC supply is recommended if powering external devices from the board. The board can be powered through four different inputs: Barrel Jack: 5.5mm (ODOuter Diameter) x 2.1mm (IDInner Diameter), center positive mini USBUniversal Serial Bus port GPIO P9 header pins 5 and 6 (VDD_5V) Battery Pins: 4 pin through holes TP5 - TP8 Board has a TPS65217C PMICPower Management Integrated Circuit (PMIC) regulator and one additional LDOLow Dropout Regulator
Board Size (LxW)	86.36mm x 53.34mm (3.40in x 2.15in)

BeagleBone Black Boards

BeagleBone Black Rev C

Package includes:

1x BeagleBone Black Rev C Board
1x USB type A to mini-B cable

Note: Requires 5V 2A DC power supply via 5.5mm (OD) x 2.1mm (ID) barrel jack center positive (not included) or mini USB port

Price: $59.99(Updated UTC)

Amazon.com ()

eleduino BeagleBone Black Rev C (4G)

Package includes:

1x BeagleBone Black Rev C Board
1x USB type A to mini-B cable

Note: Requires 5V 2A DC power supply via 5.5mm (OD) x 2.1mm (ID) barrel jack center positive (not included) or mini USB port

Price: Unavailable (Updated UTC)

Amazon.com ()

Waveshare BeagleBone Black Rev C

Seller: Waveshare

Package includes:

1x BeagleBone Black Rev C Board
1x USB type A to mini-B cable

Note: Requires 5V 2A DC power supply via 5.5mm (OD) x 2.1mm (ID) barrel jack center positive (not included) or mini USB port

Price: $83.99(Updated UTC)

Amazon.com ()

BeagleBone Black Accessories

BeagleBone Black Power Supplies

ALITOVE 5V 3A 15W AC 100V~240V to DC Power Supply Adapter

Seller: ALITOVE

Package includes:

1x 5V 3A power supply adapter
1x DC female connector

+ About this item:

Input: 100V-240V 50/60Hz; Output: 5V DC up to 3 Amps; Output adaptor jack size: 5.5mm x 2.5mm, compatible with 5.5mm x 2.1mm
It comes with a female DC connector for screwing wires onto it. You can easily connect wires on it without soldering.
Safety features: Automatic overload cut-off, over Voltage cut-off, automatic thermal cut-off, short circuit protection.
Enough 15W output power and 5V stable output voltage will protect your electronic products from destruction.
Cable length: 35.4in (90cm)

Price: $8.99(Updated UTC)

Amazon.com ()

HQRP 5V 3A AC to DC Adapter + Euro Plug Adapter

Seller: HQRP-US

Package includes:

1x 5V 3A power supply adapter
1x Euro Adapter

+ About this item:

Input: 100V-240V AC; Output: DC 5V, 3A;
UL Listed; Safety Features: High Efficiency and Reliability; Automatic Overload cut-off;
Automatic Thermal cut-off; Short circuit and Over Voltage protection; Low Interference & Noise;

Price: $9.91(Updated UTC)

Amazon.com ()

BeagleBone Black Enclosures

OONO Semi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega

Seller: Electronics-Salon

Package includes:

2x covers
8x M4x40mm standoffs
4x M4x10mm spacers
4x M4x8mm screws
16x M2.5x6mm screws
8x M2.5x10mm spacers (for Arduino MKR module install, must use M2x12mm spacers and M2x6mm screws, but the kit not include these spacer and screws)

+ About this item:

This is a multi-purpose semi-enclosed enclosure kit, Supports Raspberry Pi 1 Model A+ / Pi 1 Model B+ / Pi 2 Model B / Pi 3 Model B / Pi 3 Model B+ / Pi 4 Module B / Pi Zero / Pi Zero W, Arduino Uno R2 / Uno R3 / Mega 2560 R2 / Mega 2560 R3 / MKR Series etc, and BeagleBone / BeagleBone Black / BeagleBone AI / BeagleBone Black Wireless / BeagleBone Green / BeagleBone Green Wireless or SanCloud BeagleBone Enhanced.
The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Arduino stack SHIELD module, or Beaglebone stack CAP module.
The material of the lower cover and upper cover is 1.5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material.

Price: $19.90(Updated UTC)

Amazon.com ()

KKSB Case for BeagleBone Black | Powder-Coated Steel

Seller: KKSB-Cases

Package includes:

1x BeagleBone Case

+ About this item:

Made of powder-coated steel. The lid has long ventilation openings. The case has special cutouts for USB ports, power jack, an Ethernet jack, power buttons, a micro HDMI port and a microSD card, as well as for the ports of the BeagleBone Black SBC.
Optimal cooling efficiency and compatibility. The case body acts as an effective heatsink, so no additional fan is required. The case also offers reliable protection against damage if the device should fall, as well as against scratches and signs of wear.
4 non-slip rubber feet ensure a secure grip on any surface. 2 mounting holes can be used to attach the housing to the wall or other surface.

Price: $17.00(Updated UTC)

Amazon.com ()

KKSB BeagleBone Case | BeagleBone AI Case | BeagleBone Black Case | BeagleBone Enclosure with Space for BeagleBone Capes

Seller: KKSB-Cases

Package includes:

1x BeagleBone Case

+ About this item:

Designed for BeagleBone Black and BeagleBone AI SBCs such that it can accommodate most BeagleBone CAPES (one at a time) on top of the board. The surfaces are polished and all openings are CNC machined. The KKSB BeagleBone case has 4 rubber feet on the underside for optimal stability. Air vents on top support proper airflow to help passive cooling.
Optimal cooling efficiency and compatibility. The case body acts as an effective heatsink, so no additional fan is required. The case also offers reliable protection against damage if the device should fall, as well as against scratches and signs of wear.
4 screws to assemble the lid and base, assembly is very easy. 4 non-slip rubber feet ensure a secure grip on any surface. 4 mounting holes can be used to attach the case to the wall or other surface.

Price: Unavailable (Updated UTC)

Amazon.com ()

BeagleBone Black Products

Description

BeagleBone Black Specs

BeagleBone Black Boards

BeagleBone Black Accessories

BeagleBone Black Power Supplies

BeagleBone Black Enclosures

(0) Comments

Sign in to leave a comment

Sign In

BeagleBone Black Products

Description

BeagleBone Black Specs

BeagleBone Black Boards

BeagleBone Black Accessories

BeagleBone Black Power Supplies

BeagleBone Black Enclosures

(0) Comments

Sign in to leave a comment Sign In

Sign in to leave a comment

Sign In