Seeed Studio XIAO ESP32-S3 Products

Description

The Seeed Studio XIAO ESP32-S3 is a small thumb-sized 21mm x 17.5mm (0.83in x 0.69in) microcontroller board with WiFi (2.4GHz 802.11b/g/n up to 150Mbps) and Bluetooth 5 (BLEBluetooth Low Energy).

The board contains an ESP32-S3 SoCSystem On a Chip (Datasheet PDF) with an Xtensa LX7 32-bit Dual-Core 240MHz processor, 8MB PSRAMPseudo Static Random Access Memory (PSRAM) is dynamic RAM with built-in refresh and address-control circuitry to make it behave similarly to Static RAM (SRAM). memory, 8MB of flash memory, USB-C connector, reset and boot buttons, user LED, battery charge status LED, and uFL connector for an external antenna. A uFL antenna comes with the board that provides a wireless connection over 100m.

There are two solder pads on the back of the board (labeled BAT) for connecting a single-cell LiPoLithium Polymer/Li-ionLithium-ion battery. The board has a battery charge chip that allows you to charge the battery when power is applied to the USB and a charge status LED.

The I/OInput/Output pins are 3.3V and includes 11x digital pins with PWMPulse-Width Modulation, 9x analog inputs (12-bit ADCAnalog-to-Digital Converter (ADC, A/D, or A-to-D)), and serial communication ports (1x UARTUniversal Asynchronous Receiver-Transmitter, 1x I2CInter-Integrated Circuit. Also referred to as IIC or I²C., 1x SPISerial Peripheral Interface, and 1x I2SInter-IC Sound).

Dev Boards

---

Seeed Studio XIAO ESP32-S3 Dev Board

Package includes:

• 1x XIAO ESP32-S3 Board
• 1x uFL antenna

+ About this item:

• ESP32-S3 SoC with an Xtensa LX7 32-bit Dual-Core 240MHz processor
• 8MB PSRAM memory and 8MB of flash memory
• uFL connector with an external antenna that provides a connection over 100m
• 2.4GHz 802.11b/g/n WiFi up to 150Mbps
• Bluetooth 5 (BLE)
• USB-C connector for power and data transfer
• 2x Buttons: reset and boot
• 2x LEDs: user LED and battery charge status LED
• 14x Pin Through holes (7 on each side of the board) with 0.1" (2.54mm) spacing
• The I/O pins are 3.3V and includes 11x digital pins with PWM, 9x analog inputs (12-bit ADC), and serial communication ports (1x UART, 1x I2C, 1x SPI, and 1x I2S).
• There are two solder pads on the back of the board (labeled BAT) for connecting a single-cell LiPo/Li-ion battery. The board has a battery charge chip that allows you to charge the battery when power is applied to the USB and a charge status LED.
• Board Size: 21mm x 17.5mm (0.83in x 0.69in)

Price: $7.49(Updated 10Aug2024 05:49:532024-08-10T05:49:53Z UTC UTC)

SeeedStudio.com

---

Seeed Studio XIAO ESP32-S3 Dev Board

Seller: Seeed Studio Official

Package includes:

• 1x XIAO ESP32-S3 Board
• 1x uFL antenna

+ About this item:

• ESP32-S3 SoC with an Xtensa LX7 32-bit Dual-Core 240MHz processor
• 8MB PSRAM memory and 8MB of flash memory
• uFL connector with an external antenna that provides a connection over 100m
• 2.4GHz 802.11b/g/n WiFi up to 150Mbps
• Bluetooth 5 (BLE)
• USB-C connector for power and data transfer
• 2x Buttons: reset and boot
• 2x LEDs: user LED and battery charge status LED
• 14x Pin Through holes (7 on each side of the board) with 0.1" (2.54mm) spacing
• The I/O pins are 3.3V and includes 11x digital pins with PWM, 9x analog inputs (12-bit ADC), and serial communication ports (1x UART, 1x I2C, 1x SPI, and 1x I2S).
• There are two solder pads on the back of the board (labeled BAT) for connecting a single-cell LiPo/Li-ion battery. The board has a battery charge chip that allows you to charge the battery when power is applied to the USB and a charge status LED.
• Board Size: 21mm x 17.5mm (0.83in x 0.69in)

Price: $16.99(Updated 10Aug2024 05:50:012024-08-10T05:50:01Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---

Seeed Studio XIAO ESP32-S3 Dev Board

Seller: IC components

Package includes:

• 1x XIAO ESP32-S3 Board
• 1x uFL antenna

+ About this item:

• ESP32-S3 SoC with an Xtensa LX7 32-bit Dual-Core 240MHz processor
• 8MB PSRAM memory and 8MB of flash memory
• uFL connector with an external antenna that provides a connection over 100m
• 2.4GHz 802.11b/g/n WiFi up to 150Mbps
• Bluetooth 5 (BLE)
• USB-C connector for power and data transfer
• 2x Buttons: reset and boot
• 2x LEDs: user LED and battery charge status LED
• 14x Pin Through holes (7 on each side of the board) with 0.1" (2.54mm) spacing
• The I/O pins are 3.3V and includes 11x digital pins with PWM, 9x analog inputs (12-bit ADC), and serial communication ports (1x UART, 1x I2C, 1x SPI, and 1x I2S).
• There are two solder pads on the back of the board (labeled BAT) for connecting a single-cell LiPo/Li-ion battery. The board has a battery charge chip that allows you to charge the battery when power is applied to the USB and a charge status LED.
• Board Size: 21mm x 17.5mm (0.83in x 0.69in)

Price: $7.23(Updated 10Aug2024 05:50:152024-08-10T05:50:15Z UTC UTC)

AliExpress

---

Seeed Studio XIAO ESP32-S3 Dev Board

Seller: Diymore

Package includes:

• 1x XIAO ESP32-S3 Board
• 1x uFL antenna

+ About this item:

• ESP32-S3 SoC with an Xtensa LX7 32-bit Dual-Core 240MHz processor
• 8MB PSRAM memory and 8MB of flash memory
• uFL connector with an external antenna that provides a connection over 100m
• 2.4GHz 802.11b/g/n WiFi up to 150Mbps
• Bluetooth 5 (BLE)
• USB-C connector for power and data transfer
• 2x Buttons: reset and boot
• 2x LEDs: user LED and battery charge status LED
• 14x Pin Through holes (7 on each side of the board) with 0.1" (2.54mm) spacing
• The I/O pins are 3.3V and includes 11x digital pins with PWM, 9x analog inputs (12-bit ADC), and serial communication ports (1x UART, 1x I2C, 1x SPI, and 1x I2S).
• There are two solder pads on the back of the board (labeled BAT) for connecting a single-cell LiPo/Li-ion battery. The board has a battery charge chip that allows you to charge the battery when power is applied to the USB and a charge status LED.
• Board Size: 21mm x 17.5mm (0.83in x 0.69in)

Price: $17.30(Updated 10Aug2024 05:50:232024-08-10T05:50:23Z UTC UTC)

AliExpress

---