ESP32-WROOM-32 D1 Mini Products
Created:
31Jan2024 23:54:50 UTC
2024-01-31T23:54:50Z
Updated:
06Sep2024 04:46:18 UTC
2024-09-06T04:46:18Z
Description
The ESP32-WROOM-32 D1 Mini breakout board has a form factor of 39mm x 28mm (1.5in x 1.1in) and provides 2.4GHz WiFi (802.11IEEE 802.11 is a set of protocol standards that define communication for a Wireless Local Area Network (WLAN). In order for WiFi to work between different devices, they all need to agree on how they are going to communicate. The current version of the standard is IEEE 802.11-2007, with many amendments such as 802.11a, 802.11b, 802.11g, and 802.11n.b/g/n up to 150Mbps with APA WiFi Access Point (AP) is a device that creates a wireless local area network, or WLAN, and acts as a central hub that allows other devices, such as smartphones or computers, to connect to it over WiFi./STAA WiFi Station (STA) is a device that has the capability to connect to an existing WiFi network as a client in the same way other devices, such as smartphones or computers, join an established network and communicate with other devices on that network or access the internet./AP+STAA WiFi device in AP+STA mode acts as both an Access Point (AP) as well as a Station (STA), where the device can connect to an existing network as a client (STA) while simultaneously hosting its own network (AP) for other devices to connect to. modes) and Bluetooth (v4.2 BRBasic Rate/EDREnhanced Data Rate and BLEBluetooth Low Energy).
The ESP32-WROOM-32 module (Datasheet PDF) contains an ESP32-D0WDQ6 SoCSystem On a Chip with an Xtensa 32-bit LX6 Dual-Core 80MHz to 240MHz processor, 4MB/8MB/16MB SPISerial Peripheral Interface Flash memory chip, and PCBPrinted Circuit Board antenna.
The D1 Mini has a Micro-B USB connector for power and data transfer using CP2104 USB to UART serial adapter chip. The I/OInput/Output pins on each side of the board are 3.3V (max) and includes 26x GPIOGeneral Purpose Input Output with PWMPulse-Width Modulation, 4x analog inputs (12-bit ADCAnalog-to-Digital Converter (ADC, A/D, or A-to-D)), 1x analog output (8-bit DACDigital-to-Analog Converter (DAC, D/A, or D-to-A)), 2x UARTUniversal Asynchronous Receiver-Transmitter, 1x I2CInter-Integrated Circuit. Also referred to as IIC or I2C., and 1x SPISerial Peripheral Interface. Shields are also available for this board.
Dev Boards
ESP32-WROOM-32 D1 Mini
- 3x ESP32 D1 Mini Board
- 6x 10-Pin Straight Male Header
- 6x 10-Pin Female Dupont Header (short)
- 6x 10-Pin Female Dupont Header (long)
- 3x ESP32 D1 Mini Board
- 6x 10-Pin Straight Male Header
- 6x 10-Pin Female Dupont Header (short)
- 6x 10-Pin Female Dupont Header (long)
- 4x ESP32 D1 Mini Board
- 8x 10-Pin Straight Male Header
- 8x 10-Pin Female Dupont Header (short)
- 8x 10-Pin Female Dupont Header (long)
Accessories
D1 Mini Battery Shields
- 1x Wemos D1 Mini Battery Shield
- 2x 8-Pin Straight Header
- 1x Wemos D1 Mini Battery Shield
- 2x 8-Pin Straight Header
- 1x Wemos D1 Mini Battery Shield
- 2x 8-Pin Straight Header
- 4x Wemos D1 Mini Battery Shield
- 8x 8-Pin Straight Header
(0) Comments
Sign in to leave a comment
Sign In