Seeed Studio XIAO RP2040 Microcontroller Board Products

Created: 11Sep2024 06:41:18 UTC 2024-09-11T06:41:18Z
Updated: 17Sep2024 06:51:44 UTC 2024-09-17T06:51:44Z

Description

The Seeed Studio XIAO RP2040 microcontroller board breaks out the RP2040 MCUMicrocontroller Unit on a small thumb-sized board (0.8in x 0.7in). The board includes a 2MB flash chip to store program code, USB-C connector for power and programming, boot button, reset button, and programmable LEDLight Emitting Diodes.

Processor

RP2040 Dual-Core 32-bit Cortex M0+ processors up to 133MHz

Memory

2MB QSPIQuad Serial Peripheral Interface (QSPI) is a serial communication interface designed for talking to flash chips by using 4 data lines. Flash Chip
264KB SRAMStatic Random Access Memory

I/OInput/Output

1x USB-C connector (USB 1.1 Host or Device Full/Low speed)
11x Digital I/OInput/Output with PWMPulse-Width Modulation (3.3V Logic)
4x Analog Input pins 12-bit 500ksps ADCAnalog-to-Digital Converter (ADC, A/D, or A-to-D) (0V to 3.3V range)
Communication Interfaces (3.3V Logic): 1x UARTUniversal Asynchronous Receiver-Transmitter, 1x I2CInter-Integrated Circuit. Also referred to as IIC or I²C., and 1x SPISerial Peripheral Interface
SWDSerial Wire Debug bonding pad interface

User Interface

1x Boot Button
1x Reset Button
1x Programmable Single-Color User LED (3 Colors: Red, Green, or Blue)
1x Power LED
1x RGB LED

Power

The board can be powered by the USB-C connector. The built-in DC-DC converter circuit is able to change 5V into 3.3V to allow powering the device with an external 5V supply by either the VIN pin or 5V pin. The 3V3 pin is the output of the DC-DC converter.

Board Size