RP2040 Microcontroller Board Products

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

The RPi Pico H has headers soldered on the board and a 3-pin 1.0mm pitch JST SH side entry connector (SM03B-SRSS-TB) for Serial Wire Debug (SWD) soldered on the end of the board

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

The RPi Pico H has headers soldered on the board and a 3-pin 1.0mm pitch JST SH side entry connector (SM03B-SRSS-TB) for Serial Wire Debug (SWD) soldered on the end of the board

• Processor: 32-bit 133MHz Dual-Core Arm Cortex-M0+
• Memory: 2MB QSPI Flash and 264KB SRAM
• 26x multi-function GPIO pins with 16x controllable PWM channels
• 2x UART, 2x SPI, and 2x I2C
• 3x 12-bit 500kbs ADC
• 1x USB Micro-B port with USB 1.1 Host and Device Full/Low speed
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• RP2040 Dual Cortex M0+ processors, up to 133 MHz
• Interface: 20x GPIO pins (10x PWM) 3.3V logic, 4x 12-bit 0.5MSPS ADC, 2x UART, 1x I2C (Qwiic connector), 1x SPI, and USB-C connector.
• Memory: 16MB QSPI Flash and 264KB SRAM
• Voltage Supply: 5V USB (AP2112 3.3V voltage regulator) or unregulated 3.3V pin
• Board Size: 33.0mm x 17.8mm (1.3in x 0.7in)

• RP2040 Dual Cortex M0+ processors, up to 133 MHz
• Interface: 20x GPIO pins (10x PWM) 3.3V logic, 4x 12-bit 0.5MSPS ADC, 2x UART, 1x I2C (Qwiic connector), 1x SPI, and USB-C connector.
• Memory: 16MB QSPI Flash and 264KB SRAM
• Voltage Supply: 5V USB (AP2112 3.3V voltage regulator) or unregulated 3.3V pin
• Board Size: 33.0mm x 17.8mm (1.3in x 0.7in)

• RP2040 32-bit Cortex M0+ dual core processor, clocked at 125MHz, and 3.3V logic
• RP2040 Memory: 264KB RAM
• Memory Chip: 8MB SPI Flash chip for storing files and CircuitPython code storage
• 21 GPIO pins
• 4x 12-bit ADCs (one more than Pico)
• 2x I2C, 2x SPI, and 2x UART peripherals
• 16x PWM outputs - for servos, LEDs, etc
• 8x digital non-ADC/non-peripheral GPIO are consecutive for maximum PIO compatibility
• On-board STEMMA QT connector that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices
• On-board RGB NeoPixel LED
• Voltage Supply: 5V Micro USB and JST jack for 4.2V/3.7V LiPo/LiIon battery (with built in battery charging)
• Board Size: 2.0in x 0.9in x 0.28in (50.8mm x 22.8mm x 7mm) without headers soldered in

• RP2040 32-bit Cortex M0+ dual core processor, clocked at 125MHz, and 3.3V logic
• RP2040 Memory: 264KB RAM
• Memory Chip: 8MB SPI Flash chip for storing files and CircuitPython code storage
• 21 GPIO pins
• 4x 12-bit ADCs (one more than Pico)
• 2x I2C, 2x SPI, and 2x UART peripherals
• 16x PWM outputs - for servos, LEDs, etc
• 8x digital non-ADC/non-peripheral GPIO are consecutive for maximum PIO compatibility
• On-board STEMMA QT connector that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices
• On-board RGB NeoPixel LED
• Voltage Supply: 5V Micro USB and JST jack for 4.2V/3.7V LiPo/LiIon battery (with built in battery charging)
• Board Size: 2.0in x 0.9in x 0.28in (50.8mm x 22.8mm x 7mm) without headers soldered in

• RP2040 32-bit Cortex M0+ dual core processor, clocked at 125MHz, and 3.3V logic
• RP2040 Memory: 264KB RAM
• Memory Chip: 8MB SPI Flash chip for storing files and CircuitPython code storage
• 21 GPIO pins
• 4x 12-bit ADCs (one more than Pico)
• 2x I2C, 2x SPI, and 2x UART peripherals
• 16x PWM outputs - for servos, LEDs, etc
• 8x digital non-ADC/non-peripheral GPIO are consecutive for maximum PIO compatibility
• On-board STEMMA QT connector that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices
• On-board STEMMA QT connector that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices
• On-board RGB NeoPixel LED
• Voltage Supply: 5V Micro USB and JST jack for 4.2V/3.7V LiPo/LiIon battery (with built in battery charging)
• Board Size: 2.0in x 0.9in x 0.28in (50.8mm x 22.8mm x 7mm) without headers soldered in

• RP2040 32-bit Cortex M0+ dual core processor, clocked at 125MHz, and 3.3V logic
• RP2040 Memory: 264KB RAM
• Memory Chip: 8MB SPI Flash chip for storing files and CircuitPython code storage
• 21 GPIO pins
• 4x 12-bit ADCs (one more than Pico)
• 2x I2C, 2x SPI, and 2x UART peripherals
• 16x PWM outputs - for servos, LEDs, etc
• 8x digital non-ADC/non-peripheral GPIO are consecutive for maximum PIO compatibility
• On-board STEMMA QT connector that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices
• On-board RGB NeoPixel LED
• Voltage Supply: 5V Micro USB and JST jack for 4.2V/3.7V LiPo/LiIon battery (with built in battery charging)
• Board Size: 2.0in x 0.9in x 0.28in (50.8mm x 22.8mm x 7mm) without headers soldered in

• RP2040 32-bit Cortex M0+ dual core running at ~125 MHz @ 3.3V logic and power
• Memory: 264KB of SRAM, 8MB SPI Flash chip for storing files and CircuitPython/MicroPython code storage, No EEPROM
• Micro-B USB Connector
• 23x GPIO
• Onboard LEDs: Pin #11 red LED for general purpose blinking, RGB NeoPixel with power pin on GPIO so you can depower it for low power usages.
• Onboard Buttons: Reset button and Bootloader select button for quick restarts
• Power: 3.3V regulator with 500mA peak current output. Power with either USB or external output (such as a battery) - it will automatically switch over
• Dimensions: 36mm x 18mm (1.4in x 0.7in)

• RP2040 32-bit Cortex M0+ Dual-Core running at ~125MHz @ 3.3V logic and power, 264KB RAM, 8MB SPI FLASH
• USB Type-C connector for power and data transfer
• Can be used with Arduino IDE or CircuitPython
• Built in RGB NeoPixel LED
• 13x GPIO pins (11x breakout pads and two QT pads) with four 12-bit ADCs (one more than Pico), PWM on every I/O pin, 6x GPIO for PIO, I2C/UART/SPI/I2C
• 3.3V regulator with 600mA peak output
• Reset switch for starting your project code over or entering bootloader mode
• Board Size: 0.82in x 0.60in

• RP2040 32-bit Cortex M0+ Dual-Core running at ~125MHz @ 3.3V logic and power, 264KB RAM, 8MB SPI FLASH
• USB Type-C connector for power and data transfer
• Can be used with Arduino IDE or CircuitPython
• Built in RGB NeoPixel LED
• 13x GPIO pins (11x breakout pads and two QT pads) with four 12-bit ADCs (one more than Pico), PWM on every I/O pin, 6x GPIO for PIO, I2C/UART/SPI/I2C
• 3.3V regulator with 600mA peak output
• Reset switch for starting your project code over or entering bootloader mode
• Board Size: 0.82in x 0.60in

• RP2040 microcontroller running at up to 133Mhz
• Memory: 264kB of SRAM and 8MB of QSPI flash supporting XiP
• USB-C connector for power, programming, and data transfer
• User controllable RGB LED
• Twelve IO pins (including four 12-bit ADC channels)
• On-board 3V3 regulator (max regulator current output 300mA). Input voltage range 3V to 5.5V
• Dimensions: 22.9 x 18.2 x 6mm (including the USB-C port)

• RP2040 microcontroller running at up to 133Mhz
• Memory: 264kB of SRAM and 8MB of QSPI flash supporting XiP
• USB-C connector for power, programming, and data transfer
• User controllable RGB LED
• Twelve IO pins (including four 12-bit ADC channels)
• On-board 3V3 regulator (max regulator current output 300mA). Input voltage range 3V to 5.5V
• Dimensions: 22.9 x 18.2 x 6mm (including the USB-C port)

• Raspberry RP2040 chip with 264KB of SRAM, and 2MB of onboard Flash memory. This microcontroller has dual-core ARM Cortex M0+ processor, and it can runs at up to 133MHz.
• This version of XIAO have 11x digital pins, 4x analog pins, 11x PWM Pins, 1x I2C interface, 1x UART interface, 1x SPI interface, 1 SWD Bonding pad interface.
• USB Type-C interface for power and data transfer
• 1x user LED, 1x power LED, 2x LEDs for serial port downloading, and 1x RGB LED
• 1x RESET button, 1x BOOT button
• Support Micropython/Arduino/CircuitPython
• Board Size: 20mm x 17.5mm

• Raspberry RP2040 chip with 264KB of SRAM, and 2MB of onboard Flash memory. This microcontroller has dual-core ARM Cortex M0+ processor, and it can runs at up to 133MHz.
• This version of XIAO have 11x digital pins, 4x analog pins, 11x PWM Pins, 1x I2C interface, 1x UART interface, 1x SPI interface, 1 SWD Bonding pad interface.
• USB Type-C interface for power and data transfer
• 1x user LED, 1x power LED, 2x LEDs for serial port downloading, and 1x RGB LED
• 1x RESET button, 1x BOOT button
• Support Micropython/Arduino/CircuitPython
• Board Size: 20mm x 17.5mm

• Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
• 2MB Flash
• USB-C connector
• 29x multi-function GPIO pins (20x via edge pinout, others via solder points) 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels
• 8x Programmable I/O (PIO) state machines for custom peripheral support
• RGB LED
• BOOT button & RESET button
• ME621 low dropout LDO, max current 800mA
• Board Size: 23.5mm x 18mm

• Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
• 2MB Flash
• USB-C connector
• 29x multi-function GPIO pins (20x via edge pinout, others via solder points) 2x SPI, 2x I2C, 2x UART, 4x 12-bit ADC, 16x controllable PWM channels
• 8x Programmable I/O (PIO) state machines for custom peripheral support
• RGB LED
• BOOT button & RESET button
• ME621 low dropout LDO, max current 800mA
• Board Size: 23.5mm x 18mm

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

Headers soldered on the board and a 3-pin 1.0mm pitch JST SH top entry connector for Serial Wire Debug (SWD) soldered on the end of the board

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

Headers soldered on the board and a 3-pin 1.0mm pitch JST SH top entry connector for Serial Wire Debug (SWD) soldered on the end of the board

• RP2040 MCU: Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz, 264KB of SRAM, and 2MB of on-board Flash memory.
• Onboard Infineon CYW43439 wireless chip with internal antenna supports 2.4GHz 802.11b/g/n Wi-Fi and Bluethooth 5.2
• Micro-B USB connector for power and communication with a computer. USB 1.1 with device and host support. Drag-and-drop programming using mass storage over USB
• Castellated module allows soldering directly to carrier boards
• I/O pins are all 3.3V. There are 26x multifunctional GPIO pins with 16x PWM, 2x UART, 2x I2C, 2x SPI, and 8x Programmable I/O (PIO) state machines for custom peripheral support. There are 3x analogue inputs with 12-bit ADC.
• Supply Voltage: 1.8V to 5.5V DC via USB power supply or VSYS pin
• Low-power sleep and dormant modes
• Board Size: 51mm x 21mm (2.01in x 0.83in)

Arduino Nano RP2040 Connect board with pre-soldered headers (ABX00053)

• The ease of use of a Nano board with the addition of secure IoT and Bluetooth (BLE) connectivity
• The Wi-Fi and Bluetooth connectivity is performed with the u-blox NINA-W102 module, which provides 2.4GHz 802.11b/g/n Wi-Fi up to 72Mbps, BT v4.2 BR/EDR and BLE, 2MB SPI Flash, and an onboard PIFA antenna.
• Includes a 32-bit 133MHz Dual-Core RP2040 MCU with 264KB SRAM and external 16MB Flash.
• Secure WiFi and Bluetooth connectivity with a ECC608A crypto chip provides IoT security.
• Two 15 pin headers (one on each side) that are pin to pin compatible with the original Arduino Nano.
• Peripheral interfaces: digital I/O, PWM, 12-bit ADC
• Communication interfaces: UART/I2C/SPI
• Micro-B USB connector for power, programming, and data transfer
• Onboard reset button, RGB LED (connected u-blox NINA-W102 module), and 6-axis IMU chip (3D accelerometer and 3D gyroscope), and MEMs microphone.
• Board Size: 45mm x 18mm (1.77in x 0.71in)

Arduino Nano RP2040 Connect board with pre-soldered headers (ABX00053)

• The ease of use of a Nano board with the addition of secure IoT and Bluetooth (BLE) connectivity
• The Wi-Fi and Bluetooth connectivity is performed with the u-blox NINA-W102 module, which provides 2.4GHz 802.11b/g/n Wi-Fi up to 72Mbps, BT v4.2 BR/EDR and BLE, 2MB SPI Flash, and an onboard PIFA antenna.
• Includes a 32-bit 133MHz Dual-Core RP2040 MCU with 264KB SRAM and external 16MB Flash.
• Secure WiFi and Bluetooth connectivity with a ECC608A crypto chip provides IoT security.
• Two 15 pin headers (one on each side) that are pin to pin compatible with the original Arduino Nano.
• Peripheral interfaces: digital I/O, PWM, 12-bit ADC
• Communication interfaces: UART/I2C/SPI
• Micro-B USB connector for power, programming, and data transfer
• Onboard reset button, RGB LED (connected u-blox NINA-W102 module), and 6-axis IMU chip (3D accelerometer and 3D gyroscope), and MEMs microphone.
• Board Size: 45mm x 18mm (1.77in x 0.71in)

• RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors... and built in LiPo charging
• 4 MB of QSPI (XiP) flash
• Onboard LiPo/LiIon battery management - the inbuilt charging circuitry makes it easy to charge your battery by just plugging your Pimoroni Pico Lipo in via USB. There's two indicator LEDs connected to the battery circuit to keep you informed of on/off state and charging status and it's compatible with any LiPo, LiIon, and high capacity LiPo batteries.
• Programmable with C++, MicroPython or CircuitPython
• Dimensions (LxWxH): 53mm x 21mm x 8mm including connectors

• RP2040-powered microcontroller with lots of flash memory, USB-C, STEMMA QT/Qwiic and debug connectors... and built in LiPo charging
• 4 MB of QSPI (XiP) flash
• Onboard LiPo/LiIon battery management - the inbuilt charging circuitry makes it easy to charge your battery by just plugging your Pimoroni Pico Lipo in via USB. There's two indicator LEDs connected to the battery circuit to keep you informed of on/off state and charging status and it's compatible with any LiPo, LiIon, and high capacity LiPo batteries.
• Programmable with C++, MicroPython or CircuitPython
• Dimensions (LxWxH): 53mm x 21mm x 8mm including connectors

• Features Raspberry Pi Foundation's RP2040 microcontroller with Thing Plus (or Feather) Form-Factor
• 16MB QSPI Flash Memory
• USB-C Connector: USB 1.1 Host/Device functionality
• 28 PTH Pins
• JTAG PTH Pins
• 2-pin JST Connector for a LiPo Battery (not included) with 500mA charging circuit
• 4-Pin Qwiic Connector
• Buttons: Boot, Reset
• Onboard LEDs: PWR - Red 3.3V power indicator, CHG - Yellow battery charging indicator, 25 - Blue status/test LED (GPIO 25), WS2812 - Addressable RGB LED (GPIO 08)
• Four Mounting Holes: 4-40 screw compatible
• micro-SD Card Slot on back of board
• Dimensions: 2.3in x 0.9in

• Features Raspberry Pi Foundation's RP2040 microcontroller with Thing Plus (or Feather) Form-Factor
• 16MB QSPI Flash Memory
• USB-C Connector: USB 1.1 Host/Device functionality
• 28 PTH Pins
• JTAG PTH Pins
• 2-pin JST Connector for a LiPo Battery (not included) with 500mA charging circuit
• 4-Pin Qwiic Connector
• Buttons: Boot, Reset
• Onboard LEDs: PWR - Red 3.3V power indicator, CHG - Yellow battery charging indicator, 25 - Blue status/test LED (GPIO 25), WS2812 - Addressable RGB LED (GPIO 08)
• Four Mounting Holes: 4-40 screw compatible
• micro-SD Card Slot on back of board
• Dimensions: 2.3in x 0.9in

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• Memory: 264KB of SRAM, and 4MB of on-board Flash memory
• USB-C connector
• Recharge/discharge MX1.25 header for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
• 1x Onboard User LED
• 26x multi-functional GPIO Pins
• Onboard Buttons: BOOT button press it when resetting to enter download mode and RESET button
• Power: Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, 2A current switch
• ETA6096 high efficiency Lithium battery recharge manager
• Dimensions: 51mm x 21mm

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• Memory: 264KB of SRAM, and 4MB of on-board Flash memory
• USB-C connector
• Recharge/discharge MX1.25 header for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
• 1x Onboard User LED
• 26x multi-functional GPIO Pins
• Onboard Buttons: BOOT button press it when resetting to enter download mode and RESET button
• Power: Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, 2A current switch
• ETA6096 high efficiency Lithium battery recharge manager
• Dimensions: 51mm x 21mm

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• Memory: 264KB of SRAM, and 16MB of on-board Flash memory
• USB-C connector
• Recharge/discharge MX1.25 header for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
• 1x Onboard User LED
• 26x multi-functional GPIO Pins
• Onboard Buttons: BOOT button press it when resetting to enter download mode and RESET button
• Power: Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, 2A current switch
• ETA6096 high efficiency Lithium battery recharge manager
• Dimensions: 51mm x 21mm

• RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz
• Memory: 264KB of SRAM, and 16MB of on-board Flash memory
• USB-C connector
• Recharge/discharge MX1.25 header for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time
• 1x Onboard User LED
• 26x multi-functional GPIO Pins
• Onboard Buttons: BOOT button press it when resetting to enter download mode and RESET button
• Power: Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, 2A current switch
• ETA6096 high efficiency Lithium battery recharge manager
• Dimensions: 51mm x 21mm