Pimoroni Tiny 2040 Microcontroller Board Products

Created: 11Sep2024 06:16:38 UTC 2024-09-11T06:16:38Z
Updated: 17Sep2024 06:46:20 UTC 2024-09-17T06:46:20Z

Description

The Pimoroni Tiny 2040 microcontroller board breaks out the RP2040 MCUMicrocontroller Unit on a small thumb-sized board (0.9in x 0.7in). The board includes either a 2MB or 8MB flash chip to store program code, USB-C connector for power and programming, boot button, reset button, and a programmable RGBRed Green Blue LEDLight Emitting Diode.

Processor

RP2040 Dual-Core 32-bit Cortex M0+ processors up to 133MHz

Memory

2MB/8MB QSPIQuad Serial Peripheral Interface (QSPI) is a serial communication interface designed for talking to flash chips by using 4 data lines. Flash Chip
264KB SRAMStatic Random Access Memory

I/OInput/Output

1x USB-C connector (USB 1.1 Host or Device Full/Low speed)
12x Digital I/OInput/Output with PWMPulse-Width Modulation (3.3V Logic)
4x Analog Input pins 12-bit 500ksps ADCAnalog-to-Digital Converter (ADC, A/D, or A-to-D) (0V to 3.3V range)
Communication Interfaces (3.3V Logic): 2x UARTUniversal Asynchronous Receiver-Transmitter, 2x I2CInter-Integrated Circuit. Also referred to as IIC or I²C., and 1x SPISerial Peripheral Interface

User Interface

1x Boot Button
1x Reset Button
1x Programmable RGB LED

Power

The board can be powered by the USB-C connector. The input voltage range is 3V to 5.5V. There are also a couple power related pins.

5V pin is the VBUS voltage output from the USB port.
3V pin is the regulated output from the onboard regulator that you can draw up to 300mA.
GND is the common/ground/0V reference.

Board Size