INA219 DC Power Sensor Products

Description

The INA219 ICIntegrated Circuit is a DC high side current shunt and power monitor with an I2CInter-Integrated Circuit. Also referred to as IIC or I²C. interface. This device monitors both the shunt voltage drop and the bus voltage supply on an external load and operates from a single 3V to 5.5V supply.

There are two versions of the INA219 chip: A and B. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C). The B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C). The overall functionality of the A and B versions is otherwise the same.

INA219 Modules

Adafruit Module

---

Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

Seller: Adafruit

Package includes:

• 1x INA219 Module
• 6-pin straight header
• 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3.3V or 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Size: 25.6mm x 20.4mm x 4.7mm (1.0in x 0.8in x 0.2in)

Price: $9.95(Updated 09Oct2024 20:09:462024-10-09T20:09:46Z UTC UTC)

Adafruit.com

---

Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

Package includes:

• 1x INA219 Module
• 6-pin straight header
• 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3.3V or 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Size: 25.6mm x 20.4mm x 4.7mm (1.0in x 0.8in x 0.2in)

Price: $14.74(Updated 09Oct2024 20:09:572024-10-09T20:09:57Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---

Adafruit 904 INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

Seller: Resistors Direct

Location: Lincoln, Nebraska, United States

Package includes:

• 1x INA219 Module
• 6-pin straight header
• 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3.3V or 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Size: 25.6mm x 20.4mm x 4.7mm (1.0in x 0.8in x 0.2in)

Price: $9.99(Updated 09Oct2024 20:10:032024-10-09T20:10:03Z UTC UTC)

eBay.com (Affiliate Link ⓘAs a member of the eBay Partner Network I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on eBay at the time of purchase will apply to the purchase of this product.)

---

Generic Modules

---

HiLetgo INA219 High Side DC Current Power Sensor Module

Seller: HiLetgo

Package includes:

• 1x INA219 Module
• 1x 6-pin straight male header
• 1x 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with solder jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3V to 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Board Size: 25.5mm x 22.3mm (1.0in x 0.9in)

Price: $6.69(Updated 09Oct2024 20:10:542024-10-09T20:10:54Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---

HiLetgo INA219 High Side DC Current Power Sensor Module (2PCS)

Seller: HiLetgo

Package includes:

• 2x INA219 Module
• 2x 6-pin straight male header
• 2x 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with solder jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3V to 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Board Size: 25.5mm x 22.3mm (1.0in x 0.9in)

Price: $8.19(Updated 09Oct2024 20:11:002024-10-09T20:11:00Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---

Dorhea INA219 High Side DC Current Power Sensor Module (2PCS)

Seller: Dorhea

Package includes:

• 2x INA219 Module
• 2x 6-pin straight male header
• 2x 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with solder jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3V to 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Board Size: 25.5mm x 22.3mm (1.0in x 0.9in)

Price: $6.99(Updated 09Oct2024 20:11:072024-10-09T20:11:07Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---

NOYITO INA219 High Side DC Current Power Sensor Module (2PCS)

Seller: NOYITO TECHNOLOGIES

Package includes:

• 2x INA219 Module
• 2x 6-pin straight male header
• 2x 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with solder jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3V to 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Board Size: 25.5mm x 22.3mm (1.0in x 0.9in)

Price: $7.99(Updated 09Oct2024 20:11:142024-10-09T20:11:14Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---

ACEIRMC INA219 High Side DC Current Power Sensor Module (6PCS)

Seller: Aceirmc US

Package includes:

• 6x INA219 Module
• 6x 6-pin straight male header
• 6x 2-pin 3.5mm terminal plug

+ About this item:

• 0.1 ohm 1% 2W current sense resistor
• Up to +26V target voltage
• Up to ±3.2A current measurement, with ±0.8mA resolution
• This board/chip uses I2C 7-bit addresses 0x40, 0x41, 0x44, 0x45, selectable with solder jumpers
• Includes a 6-pin header (so you can easily attach this sensor to a breadboard) as well as a 3.5mm terminal plug so you can easily attach and detach your load.
• Supply Voltage (VIN): 3V to 5V
• This board uses either the INA219A or INA219B IC. The A version has a ±1% total max current measurement error over the entire operating temperature range (±0.5% max at 25°C) and the B version has a ±0.5% total max current measurement error over the entire operating temperature range (±0.3% max at 25°C), but the overall functionality is otherwise the same.
• Board Size: 25.5mm x 22.3mm (1.0in x 0.9in)

Price: $16.59(Updated 09Oct2024 20:11:202024-10-09T20:11:20Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

---