SCT-013 AC Current Sensor Products
Created:
11Dec2023 07:33:32 UTC
2023-12-11T07:33:32Z
Updated:
08May2024 05:14:15 UTC
2024-05-08T05:14:15Z
Introduction
The SCT-013 Single Phase AC Split Core Current Transformer (CT) measures current through a wire and has a built-in resistor to output a proportional voltage with a standard 3.5mm audio plug. The AC frequency range of this device is 50Hz to 1kHz, making it useful for mains electricity monitoring.
The SCT-013 comes in 10 different versions, each with their own maximum input current rating, as shown in the table below. The output of SCT-013-000 is a current in the range of 0 to 50mA, where you can add your own burden resistor across the output terminals to produce an output voltage. The output of SCT-013-005 through SCT-013-100 is a voltage in the range of 0V to 1V. The higher current rating allows you to measure current over a wider range, but at a cost of lower sensitivity.
Model | Input Current Rating |
Output |
---|---|---|
SCT-013-000 | 100A | 0mA to 50mA |
SCT-013-005 | 5A | 0V to 1V |
SCT-013-010 | 10A | 0V to 1V |
SCT-013-015 | 15A | 0V to 1V |
SCT-013-020 | 20A | 0V to 1V |
SCT-013-025 | 25A | 0V to 1V |
SCT-013-030 | 30A | 0V to 1V |
SCT-013-050 | 50A | 0V to 1V |
SCT-013-060 | 60A | 0V to 1V |
SCT-013-100 | 100A | 0V to 1V |
SCT-013-000
- 1x Current Sensor
SCT-013-005
- 1x AC Current Transformer Probe
- 1x AC Current Signal Conversion Module
- 1x Gravity-3P Analog Sensor Cable
- 1x AC Current Transformer Probe
- 1x AC Current Signal Conversion Module
- 1x Gravity-3P Analog Sensor Cable
- 1x Current Sensor
- 2x Current Sensor
SCT-013-010
- 1x AC Current Transformer Probe
- 1x AC Current Signal Conversion Module
- 1x Gravity-3P Analog Sensor Cable
- 1x Current Sensor
- 2x Current Sensor
SCT-013-020
- 1x AC Current Transformer Probe
- 1x AC Current Signal Conversion Module
- 1x Gravity-3P Analog Sensor Cable
- 1x AC Current Transformer Probe
- 1x AC Current Signal Conversion Module
- 1x Gravity-3P Analog Sensor Cable
- 1x Current Sensor
- 2x Current Sensor
SCT-013-030
- 1x Current Sensor
SCT-013-050
- 1x Current Sensor
- 1x Current Sensor
SCT-013-100
- 1x Current Sensor
- 2x Current Sensor
Accessories
3.5mm Jack to Bare Wire
- 4x Jack
- 1x Jack
3.5mm Jack to Screw Terminal
- 5x Jack
- 2x Jack
- 1x small screwdriver
- 2x Jack
3.5mm Jack Breakout
- 10x TRRS Jack Breakout Board
- 10x 4-Pin Straight Header
- 10x TRRS Jack Breakout Board
- 10x 4-Pin Straight Header
(0) Comments
Sign in to leave a comment
Sign In