ESP8266 ESP-12S WiFi Module Products
Created:
19Jan2024 03:56:37 UTC
2024-01-19T03:56:37Z
Updated:
09May2024 21:51:45 UTC
2024-05-09T21:51:45Z
Description
The ESP8266 ESP-12S module has a 24mm x 16mm (0.95in x 0.63in) form factor with a ESP8266EX SoCSystem On a Chip (Datasheet), built-in PCBPrinted Circuit Board antenna (MIFAMeandered Inverted-F Antenna), and 2mm spaced pins on the edge of the board for power and I/OInput/Output. The module supports 2.4GHz 802.11IEEE 802.11 is a set of protocol standards that define communication for a Wireless Local Area Network (WLAN). In order for WiFi to work between different devices, they all need to agree on how they are going to communicate. The current version of the standard is IEEE 802.11-2007, with many amendments such as 802.11a, 802.11b, 802.11g, and 802.11n.b/g/n WiFi up to 72.2Mbps, with three WiFi modes it can operate in (APA WiFi Access Point (AP) is a device that creates a wireless local area network, or WLAN, and acts as a central hub that allows other devices, such as smartphones or computers, to connect to it over WiFi./STAA WiFi Station (STA) is a device that has the capability to connect to an existing WiFi network as a client in the same way other devices, such as smartphones or computers, join an established network and communicate with other devices on that network or access the internet./AP+STAA WiFi device in AP+STA mode acts as both an Access Point (AP) as well as a Station (STA), where the device can connect to an existing network as a client (STA) while simultaneously hosting its own network (AP) for other devices to connect to.), and has UARTUniversal Asynchronous Receiver-Transmitter/I2CInter-Integrated Circuit. Also referred to as IIC or I2C./SPISerial Peripheral Interface/SDIOSecure Digital Input Output (SDIO) is a communication interface that allows devices to connect to an SD card and exchange data. communication interfaces, GPIOGeneral Purpose Input Output pins, and a 10-bit ADCAnalog-to-Digital Converter (ADC, A/D, or A-to-D) pin.
The ESP-12S has an improved PCBPrinted Circuit Board layout and antenna design for better radio performance over the ESP-12F. The ESP-12S is the same size and fully compatible with previous versions ESP-12F and ESP-12E. However, the pin count has been reduced from 22 to 16, with pins on the bottom of the board removed (the SPI pins can be accessed with multi-functional GPIO pins on the side of the board). The breakout pads of the ESP-12S module are also smaller with no more pin through holes, just castellations.
ESP8266 ESP-12S Module
- 1x ESP8266 ESP-12S Module
- 2x ESP8266 ESP-12S Module
- 5x ESP8266 ESP-12S Module
- 10x ESP8266 ESP-12S Module
ESP8266 ESP-12S Accessories
USB Programmers
ESP-12S USB Programmers make it convenient to download programs, update firmware, debug, or communicate with the ESP-12S using your computer. They usually have a switch to change operating modes between programming the firmware or communicating with the ESP-12S.
- 1x ESP8266 USB Programmer Adapter
- 1x ESP8266 USB Programmer Adapter
- 1x ESP8266 USB Programmer Adapter
- 1x ESP8266 USB Programmer Adapter
(0) Comments
Sign in to leave a comment
Sign In