nRF24L01+PA+LNA ML01DP5 2.4GHz RF Module Products
Created:
20Jan2023 07:54:17 UTC
2023-01-20T07:54:17Z
Updated:
09May2024 05:34:26 UTC
2024-05-09T05:34:26Z
Description
The nRF24L01+PAPower Amplifier+LNALow Noise Amplifier ML01DP5 RFRadio Frequency module is is a long range 2.4GHz transceiver based on the nRF24L01+ chip, equipped with 20dBmDecibel-milliwatts (dBm) is a power level that expresses decibels in terms of milliwatts on a logarithmic scale. power amplifier chip which makes the transmitting power 100mW (20dBmDecibel-milliwatts (dBm) is a power level that expresses decibels in terms of milliwatts on a logarithmic scale.) and the receiving sensitivity -106dBmDecibel-milliwatts (dBm) is a power level that expresses decibels in terms of milliwatts on a logarithmic scale. (enhanced by 10dB) at 250kbpskilobits per second, giving a range up to 2300m. It has a power supply voltage ranging from 2.0V to 3.6V DC, with an emission current draw of 95mA and a receiving current of 20mA. The input data lines are 5V tolerant which allows for direct connection of SPISerial Peripheral Interface pins to 5V devices such as the Arduino.
Modules
- 2x NRF24L01P+PA+LNA ML01DP5 transceiver modules
- 2x Antennas
- 2x NRF24L01P+PA+LNA ML01DP5 transceiver modules
- 2x Antennas
Accessories
nRF24L01+PA+LNA ML01DP5 Breadboard Adapters
The parallel layout of the 4x4 pin header on the nRF24L01+PAPower Amplifier+LNALow Noise Amplifier ML01DP5 module unfortunately is not breadboard friendly. You can use an adapter given below that separates each 4-pin row to connect this module to a breadboard.
- 5x Breadboard Adapter Board
- 5x Female 2x4 Header 2.54mm (0.1") Spacing
- 10x Straight Male 1x4 Header Pins 2.54mm (0.1") Spacing
- 5x Breadboard Adapters
- 10x Breadboard Adapters
nRF24L01+PA+LNA ML01DP5 Regulator Adapters
The nRF24L01+PAPower Amplifier+LNALow Noise Amplifier ML01DP5 module has a power supply voltage ranging from 2.0V to 3.6V DC, so if you want to power this module with a 5V microcontroller that does not have a 3.3V output, the supply voltage must be reduced with a step-down converter. There are 3.3V regulator adapters designed for the nRF24L01+ module provided below. These adapters can also be useful if your power supply is noisy. A circuit that generates a radio frequency (RFRadio Frequency) signal is extremely sensitive to power supply noise, which can significantly reduce the range you can achieve. The nRF24L01+ adapters contain both a regulator and filter capacitor to reduce the noise and increase the range of your nRF24L01+PAPower Amplifier+LNALow Noise Amplifier ML01DP5 module.
- 4x Breakout Adapters
- 10x Breadboard Adapters
nRF24L01+PA+LNA ML01DP5 SMA 2.4GHz Antennas
The nRF24L01+PAPower Amplifier+LNALow Noise Amplifier ML01DP5 SMASubMiniature version A (SMA) connector module has an female SMASubMiniature version A (SMA) connector connector for a 2.4GHz external antenna for increased range or to modify the position of the antenna. If the board does not come with an antenna or you want a different antenna (e.g., more power or compact size), you will need a mating male SMASubMiniature version A (SMA) connector 2.4GHz antenna like those listed below.
- 2x 2.4GHz Antenna Male SMA
- 2x 2.4GHz Antenna Male SMA
- 2x U.FL IPEX to SMA Female Cable (15cm length)
- 2x 2.4GHz Antenna Male SMA
- 2x 2.4GHz Antenna Male SMA
- 2x U.FL to Female SMA Cable
- 1x 2.4GHz Antenna Male SMA
- 1x U.FL to Female SMA Cable (150mm / 5.9in)
(0) Comments
Sign in to leave a comment
Sign In