nRF24L01+PA+LNA RF Module Products

Description

The nRF24L01+PA+LNA RF Module is a long range 2.4GHz transceiver based on the nRF24L01+ chip, with an on board Power Amplifier (PAPower Amplifier) and Low Noise Amplifier (LNALow Noise Amplifier) included in an RFX2401C range extender chip. The PAPower Amplifier amplifies the signal that is being transmitted by the nRF24L01+ chip. The LNALow Noise Amplifier amplifies an extremely weak signal received from the antenna (usually below microvolts or -100dBm) to a more useful level (usually around 0.5V to 1V). This amplification from an external antenna gives an increased range of up to 1100 meters. The operating frequency range of the nRF24L01+ is 2.400GHz to 2.525GHz with as many as 126 communication channels with 1MHz separation. This is a half-duplex transceiver that communicates over SPISerial Peripheral Interface with a selectable baud rates of 250kbpskilobits per second, 1MbpsMegabits per second, or 2MbpsMegabits per second. The nRF24L01+ has built-in hardware CRCCyclic Redundancy Check error detection and an auto-retransmit feature. It has a power supply voltage ranging from 1.9V to 3.6V DC with a current draw that varies with different manufacturers (typical emission current is 115mA). The input data lines are 5V tolerant which allows for direct connection of the SPISerial Peripheral Interface pins to a 5V device such as the Arduino.

Modules

MakerFocus NRF24L01+PA+LNA Wireless RF Transceiver Module 2.4GHz (2PCS)

Seller: MakerFocus

Package includes:

2x NRF24L01+ transceiver modules
2x Antennas

+ About this item:

Frequency Range: 2.400GHz to 2.525GHz with as many as 125 communication channels with 1 MHz separation
Communication Method: Half-Duplex, GFSK modulation efficiency
Maximum transmit power: 0 dBm with built-in 2.4Ghz antenna
PA Gain: 20 dB; LNA Gain: 10 dB
Sensitivity: -92 dBm at 2Mbps, -95 dBm at 1Mbps, and -95 dBm at 250kbps
Range: up to 1100m in open air
Built-in hardware CRC error detection and auto-retransmit feature
Serial Communication: SPI with a selectable baud rates of 250Kbps, 1Mbps, or 2Mbps. Input data lines are 5V tolerant
Supply Voltage: 1.9V - 3.6V DC, max current 115mA
Operating Temperature Range: -20°C to +70°C
Size: 40.7mm x 15.5mm x 12.2mm

Price: $7.99(Updated 07Aug2024 22:36:412024-08-07T22:36:41Z UTC UTC)

Amazon.com (Affiliate Link ⓘAs an Amazon associate I earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.)

HiLetgo 2.4GHz NRF24L01+PA+LNA Wireless RF Transceiver (2PCS)

Seller: HiLetgo

Package includes:

2x NRF24L01+PA+LNA Modules
2x Antennas

+ About this item:

Frequency Range: 2.400GHz to 2.525GHz with as many as 125 communication channels with 1 MHz separation
Communication Method: Half-Duplex, GFSK modulation efficiency
Maximum transmit power: 0 dBm with built-in 2.4Ghz antenna
PA Gain: 20 dB; LNA Gain: 10 dB
Sensitivity: -92 dBm at 2Mbps, -95 dBm at 1Mbps, and -95 dBm at 250kbps
Range: up to 1100m in open air
Built-in hardware CRC error detection and auto-retransmit feature
Serial Communication: SPI with a selectable baud rates of 250Kbps, 1Mbps, or 2Mbps. Input data lines are 5V tolerant
Supply Voltage: 1.9V - 3.6V DC, max current 115mA
Operating Temperature Range: -20°C to +70°C
Size: 40.7mm x 15.5mm x 12.2mm

Price: $8.49(Updated 08Aug2024 03:40:272024-08-08T03:40:27Z UTC UTC)

DollaTek 2.4GHz NRF24L01+PA+LNA Wireless RF Transceiver (2PCS)

Seller: DollaTek US

Package includes:

2x NRF24L01+PA+LNA Modules
2x Antennas

+ About this item:

Frequency Range: 2.400GHz to 2.525GHz with as many as 125 communication channels with 1 MHz separation
Communication Method: Half-Duplex, GFSK modulation efficiency
Maximum transmit power: 0 dBm with built-in 2.4Ghz antenna
PA Gain: 20 dB; LNA Gain: 10 dB
Sensitivity: -92 dBm at 2Mbps, -95 dBm at 1Mbps, and -95 dBm at 250kbps
Range: up to 1100m in open air
Built-in hardware CRC error detection and auto-retransmit feature
Serial Communication: SPI with a selectable baud rates of 250Kbps, 1Mbps, or 2Mbps. Input data lines are 5V tolerant
Supply Voltage: 1.9V - 3.6V DC, max current 115mA
Operating Temperature Range: -20°C to +70°C
Size: 40.7mm x 15.5mm x 12.2mm

Price: Unavailable (Updated 08Aug2024 03:40:442024-08-08T03:40:44Z UTC UTC)

Longruner 2.4GHz NRF24L01+PA+LNA Wireless Transceiver Module with Antenna LKY67 (3PCS)

Package includes:

3x NRF24L01+PA+LNA Modules
3x Antennas

+ About this item:

Frequency Range: 2.400GHz to 2.525GHz with as many as 125 communication channels with 1 MHz separation
Communication Method: Half-Duplex, GFSK modulation efficiency
Maximum transmit power: 0 dBm with built-in 2.4Ghz antenna
PA Gain: 20 dB; LNA Gain: 10 dB
Sensitivity: -92 dBm at 2Mbps, -95 dBm at 1Mbps, and -95 dBm at 250kbps
Range: up to 1100m in open air
Built-in hardware CRC error detection and auto-retransmit feature
Serial Communication: SPI with a selectable baud rates of 250Kbps, 1Mbps, or 2Mbps. Input data lines are 5V tolerant
Supply Voltage: 1.9V - 3.6V DC, max current 115mA
Operating Temperature Range: -20°C to +70°C
Size: 40.7mm x 15.5mm x 12.2mm

Price: Unavailable (Updated 08Aug2024 03:40:102024-08-08T03:40:10Z UTC UTC)

Aideepen 2.4GHz NRF24L01+PA+LNA Wireless RF Transceiver (3PCS)

Seller: Aideepen

Package includes:

3x NRF24L01+PA+LNA Modules
3x Antennas

+ About this item:

Frequency Range: 2.400GHz to 2.525GHz with as many as 125 communication channels with 1 MHz separation
Communication Method: Half-Duplex, GFSK modulation efficiency
Maximum transmit power: 0 dBm with built-in 2.4Ghz antenna
PA Gain: 20 dB; LNA Gain: 10 dB
Sensitivity: -92 dBm at 2Mbps, -95 dBm at 1Mbps, and -95 dBm at 250kbps
Range: up to 1100m in open air
Built-in hardware CRC error detection and auto-retransmit feature
Serial Communication: SPI with a selectable baud rates of 250Kbps, 1Mbps, or 2Mbps. Input data lines are 5V tolerant
Supply Voltage: 1.9V - 3.6V DC, max current 115mA
Operating Temperature Range: -20°C to +70°C
Size: 40.7mm x 15.5mm x 12.2mm

Price: $17.99(Updated 08Aug2024 03:41:072024-08-08T03:41:07Z UTC UTC)

Accessories

nRF24L01+PA+LNA Breadboard Adapters

The parallel layout of the 4x4 pin header on the nRF24L01+PAPower Amplifier+LNALow Noise Amplifier module unfortunately is not breadboard friendly. You can use an adapter given below that separates each 4 pin row to connect this module to a breadboard.

MakerFocus NRF24L01+ ESP8266 ESP-01 BB-ADTR Adapter (5PCS)

Seller: MakerFocus

Package includes:

5x Breadboard Adapter Board
5x Female 2x4 Header 2.54mm (0.1") Spacing
10x Straight Male 1x4 Header Pins 2.54mm (0.1") Spacing

+ About this item:

The BB-ADTR breadboard adapter makes it easy to connect any 2*4 pin device or module, such as an "nRF24L01+" or ESP8266 ESP-01 module, to a standard breadboard.
Adapters come unassembled, soldering is required.

Price: Unavailable (Updated 07Aug2024 22:37:232024-08-07T22:37:23Z UTC UTC)

DIYmall ESP8266 ESP-01 & NRF24L01+ Breakout Board Breadboard Adapter (5PCS)

Seller: DIYmall

Package includes:

5x Breadboard Adapters

+ About this item:

This breakout offers clear pinout silkprint on top
Pin headers already pre-soldered
Onboard 0.1µF decoupling capacitor makes the ESP8266 ESP-01 module run smoothly
You can easily remove this capacitor with a screwdriver (permanently) and then it can be used with nRF24 modules too. The nRF24 Vcc and Gnd pins are at different locations so this capacitor must be removed for it to work. If you still need a capacitor for it, you can always add an external one.

Price: $7.99(Updated 08Aug2024 03:44:352024-08-08T03:44:35Z UTC UTC)

Stemedu ESP8266 ESP-01 & NRF24L01+ Breakout Board Breadboard Adapter (10PCS)

Seller: Stemedu

Package includes:

10x Breadboard Adapters

+ About this item:

This breakout offers clear pinout silkprint on top
Pin headers already pre-soldered
Onboard 0.1µF decoupling capacitor makes the ESP8266 ESP-01 module run smoothly
You can easily remove this capacitor with a screwdriver (permanently) and then it can be used with nRF24 modules too. The nRF24 Vcc and Gnd pins are at different locations so this capacitor must be removed for it to work. If you still need a capacitor for it, you can always add an external one.

Price: $9.98(Updated 08Aug2024 03:45:042024-08-08T03:45:04Z UTC UTC)

nRF24L01+PA+LNA Regulator Adapters

The nRF24L01+PAPower Amplifier+LNALow Noise Amplifier module has a power supply voltage ranging from 1.9V to 3.6V DC, so if you want to power this module with a 5V microcontroller that does not have a 3.3V output, the supply voltage must be reduced with a step-down converter. There are 3.3V regulator adapters designed for the nRF24L01+ module provided in the table below. These adapters can also be useful if your power supply is noisy. A circuit that generates an (RFRadio Frequency) signal is extremely sensitive to power supply noise, which can significantly reduce the range you can achieve. The NRF24L01+ adapters contain both a regulator and filter capacitor to reduce the noise and increase the range of your nRF24L01+PAPower Amplifier+LNALow Noise Amplifier module.

Makerfire NRF24L01+ Breakout Adapter with On-board 3.3V Regulator (4PCS)

Seller: MakerFocus

Package includes:

4x Breakout Adapters

+ About this item:

On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
These Module are Arduino and Raspberry Pi compatible
Small power on SMD LED indicator
Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V

Price: Unavailable (Updated 07Aug2024 22:37:382024-08-07T22:37:38Z UTC UTC)

10Gtek# On-Board 3.3V 8Pin NRF24L01+ Wireless Module Breakout Adapter Regulator (4PCS)

Seller: 10Gtek

Package includes:

This is a socket board for the NRF24L01+ wireless module with breakout adapter 3.3V regulator on-board.
Pin headers pre-soldered, corresponding to the SPI interface from left to right: CE, CSN, SCK, MOSI, MISO, IRQ
Size (LxWxH): 26mm x 18mm x 9mm

+ About this item:

This is a socket board for the NRF24L01+ wireless module with breakout adapter 3.3V regulator on-board.
Pin headers pre-soldered, corresponding to the SPI interface from left to right: CE, CSN, SCK, MOSI, MISO, IRQ

Price: $6.89(Updated 08Aug2024 03:45:242024-08-08T03:45:24Z UTC UTC)

ASHATA NRF24L01+ 3.3V Regulator Breakout Adapter (10PCS)

Seller: Richer-R

Package includes:

10x Breadboard Adapters

+ About this item:

This is a socket board for the NRF24L01+ wireless module with breakout adapter 3.3V regulator on-board.
Pin headers pre-soldered, corresponding to the SPI interface from left to right: CE, CSN, SCK, MOSI, MISO, IRQ
Size (LxWxH): 26mm x 18mm x 9mm

Price: $8.79(Updated 08Aug2024 03:45:432024-08-08T03:45:43Z UTC UTC)

nRF24L01+PA+LNA SMA 2.4GHz Antennas

The nRF24L01+PAPower Amplifier+LNALow Noise Amplifier SMASubMiniature version A (SMA) connector module has an female SMASubMiniature version A (SMA) connector connector for a 2.4GHz external antenna for increased range or to modify the position of the antenna. If the board does not come with an antenna or you want a different antenna (e.g., more power or compact size), you will need a mating male SMASubMiniature version A (SMA) connector 2.4GHz antenna like those listed below.

FPV Small 2.4GHz Omni Directional 2dBi Antenna Male SMA Straight (2PCS)

Seller: OneLinkMore Tech

Package includes:

2x 2.4GHz Antenna Male SMA

+ About this item:

2.4GHz 2dBi antenna with Male SMA RF connector.
Frequency Range: 2.4GHz to 2.5GHz
50 ohm impedance
Maximum input Power: 50W
Size: 3cm

Price: $6.98(Updated 08Aug2024 03:49:242024-08-08T03:49:24Z UTC UTC)

CENXIFJUDZ 2.4Ghz 2dbi Omni-directional Antenna SMA Male Right Angle (2PCS)

Seller: Space Box

Package includes:

2x 2.4GHz Antenna Male SMA
2x U.FL IPEX to SMA Female Cable (15cm length)

+ About this item:

2.4GHz 2dBi antenna with Male SMA RF connector.
50 ohm impedance
Size: 1.97in x 0.39in x 0.63in

Price: $8.99(Updated 08Aug2024 03:49:432024-08-08T03:49:43Z UTC UTC)

HUAFADA 2.4Ghz 3dbi Omni-directional Swivel Antenna SMA Male (2PCS)

Package includes:

2x 2.4GHz Antenna Male SMA

+ About this item:

2.4GHz 3dBi antenna with Male SMA RF connector.
Frequency Range: 2.400GHz to 2.500GHz
50 ohm impedance
Length: 108mm (4.25in) Unbent / 87mm (3.5in) Bent

Price: $11.98(Updated 08Aug2024 03:50:072024-08-08T03:50:07Z UTC UTC)

DIYmall 2.4Ghz 3dbi Omni-directional Swivel Antenna SMA Male (2PCS)

Seller: DIYmall

Package includes:

2x 2.4GHz Antenna Male SMA
2x U.FL to Female SMA Cable

+ About this item:

2.4GHz 3dBi antenna with Male SMA RF connector.
50 ohm impedance
Size: 1.97in x 0.39in x 1.18in

Price: $9.99(Updated 08Aug2024 03:50:332024-08-08T03:50:33Z UTC UTC)

CENXIFJUDZ 2.4Ghz 6dbi Omni-directional Swivel Antenna SMA Male

Seller: Space Box

Package includes:

1x 2.4GHz Antenna Male SMA
1x U.FL to Female SMA Cable (150mm / 5.9in)

+ About this item:

2.4GHz 6dBi antenna with Male SMA RF connector.
50 ohm impedance
Length: 195mm (7.67in)

Price: $7.99(Updated 08Aug2024 03:50:462024-08-08T03:50:46Z UTC UTC)

nRF24L01+PA+LNA 2.4GHz RF Module Products

Description

Modules