Connector Products
Updated: 10May2024 01:43:18 UTC 2024-05-10T01:43:18Z
Hookup Wires
Created:
18Dec2022 19:39:09 UTC
2022-12-18T19:39:09Z
Updated:
14May2024 21:51:05 UTC
2024-05-14T21:51:05Z
Solid and Stranded Hookup Wires
Breadboard Jumper Wires
Preformed Breadboard Jumper Wires
Created:
19Dec2022 19:01:31 UTC
2022-12-19T19:01:31Z
Updated:
14May2024 23:00:05 UTC
2024-05-14T23:00:05Z
Preformed breadboard jumper wires have the ends striped and are U shaped for easily connecting components on a solderless breadboard.
Dupont Breadboard Jumper Wires
Created:
19Dec2022 20:35:38 UTC
2022-12-19T20:35:38Z
Updated:
14May2024 23:12:06 UTC
2024-05-14T23:12:06Z
Pin headers with a 0.1 inch (2.54mm) pitch, commonly referred to as Dupont connectors, have black plastic housings which retain contacts for easily plugging/unplugging into a solderless breadboard and/or device headers.
Boards
Solderless Breadboards
Created:
20Dec2022 00:44:20 UTC
2022-12-20T00:44:20Z
Updated:
14May2024 23:25:12 UTC
2024-05-14T23:25:12Z
Solderless breadboards are reusable boards for prototyping circuits that does not require any soldering or the destruction of tracks.
Solderable Boards
Created:
29Dec2022 06:38:44 UTC
2022-12-29T06:38:44Z
Updated:
10May2024 03:45:55 UTC
2024-05-10T03:45:55Z
Solderable breadboards have connected tracks similar to a solderless breadboard, making it easy to transfer a circuit prototype onto a more permanent PCBPrinted Circuit Board. Sripboards either have tracks running the length of the board or just a few holes (2 or 3 holes) connected. Perfboards have each hole electrically isolated, where connections have to be made either by wire or solder.
Cables & Connectors
JST Cables and Connectors
Created:
29Dec2022 19:49:26 UTC
2022-12-29T19:49:26Z
Updated:
14May2024 23:40:29 UTC
2024-05-14T23:40:29Z
JSTJapan Solderless Terminal connectors and cables are commonly used for rechargeable battery packs and are also used for connecting microcontroller peripherals such as SparkFun's QwiicQwiic connectors are SparkFun's name for 4-pin JST SH connectors with 1.0mm pitch. These connectors were implemented on SparkFun boards to make it easy to plug-n-play various sensors and devices without soldering and wiring. Qwiic is cross-compatible with Adafruit's STEMMA QT connectors. connector and Adafruit's STEMMA QTSTEMMA QT ('cutie') connectors are Adafruit's name for 4-pin JST SH connectors with 1.0mm pitch. These connectors were implemented on Adafruit boards to make it easy to plug-n-play various sensors and devices without soldering and wiring. The STEMMA QT (JST SH) are a smaller connector than the STEMMA (JST PH) that do not fit on smaller boards. STEMMA QT is cross-compatible with SparkFun Qwiic connectors..
Terminals
Jacks
Created:
03Nov2023 05:06:25 UTC
2023-11-03T05:06:25Z
Updated:
15May2024 00:17:54 UTC
2024-05-15T00:17:54Z
Male and Female DCDirect Current Power Jack Connectors with a 2.1mm IDInner Diameter x 5.5mm ODOuter Diameter barrel on one end and 2-wire terminal on the other end.
Screw Terminal Blocks
Created:
03Nov2023 05:20:38 UTC
2023-11-03T05:20:38Z
Updated:
15May2024 00:31:30 UTC
2024-05-15T00:31:30Z
2-Pin, 3-Pin, and 4-Pin Screw Terminal Blocks to secure wires to a circuit board or breadboard.
(0) Comments
Sign in to leave a comment
Sign In